29
Installing the electronic interface
This section only applies if the loom is provided with an electronic interface.
If your Megado has a mechanical dobby system, you have to disassemble this system first,
using the instructions of the previous pages.
Parts included with the interface:
•
Power cable (North American,
European or British)
•
USB cable and 9 Pin serial cable, to
give you both possibilities for the
connection with your computer
•
2 spare fuses
•
Rare earth magnet
•
2 threaded rods
•
2 barrel nuts.
•
4 knurled nuts
•
6 washers
Assure that the voltage showing in the
red window of the power entry module
shows the proper voltage for your
installation (110 or 220 Volt).
If not, use a small screwdriver to open
the fuse box, take out the red container
with the fuses, turn it around and put it
back.
Summary of Contents for Megado 110
Page 2: ......