18
Hook the ends of the spring cords onto
the bottom screw heads of the spring
arms (see page 37: the moving breast
beam).
Place the breast beam (from box C)
onto the pins of the spring arms.
Use the nail, again, to screw the screw
eyes into the holes on the rear of the
back posts. These screw eyes can be
used to tie up the cross sticks.
11. Assembling the beater
Open hardware Bag 5 from Box B:
•
2 hinges for the beater uprights
•
2 bolts m6 x 75 mm with washer
and barrel nut
•
2 carriage bolts m6 x 80 mm with
washer and wing nut.
•
4 washers
•
2 bushings 33 mm
•
2 lag screws 90 mm
•
3 thin cardboard strips
Take the remaining parts out of Box B. These are the beater handle and the beater uprights.
The top beater bar and the reed support have to be attached to the uprights.
Summary of Contents for Megado 110
Page 2: ......
