9
Connect the left back post with the
treadle arm in the same manner as you
did on the other side.
Take the back beam, marked P O out
of box D. First insert the wooden pegs
of the back beam on side P into the
holes in the right back post. Make sure
that the holes for the barrel nuts point
diagonally downwards.
Put the wooden pegs on side O of the
back beam into the holes of the left
back post (Connection O-O). You will
have to carefully bend the back post
towards the outside, making sure that
the warp beam does not drop out of the
loom. (You might need some help with
this.)
Tighten the back beam with two m8 x
70 mm bolts, large washer, and barrel
nut.
Connect the hinged arm to the left back
post in the same manner as you did on
the right side.
Summary of Contents for Megado 110
Page 2: ......
