30
Place the magnet onto the dobby knife
as shown in the picture and insert the
barrel nuts into the holes in the sides of
the middle section. Make sure the slots
are facing outwards.
Insert the threaded rods into the holes
in the side of the middle section and
screw them into the barrel nuts,
keeping the slot of the nuts in line with
the rods. Turn the rods by hand until
they are tight.
Slide a washer over both threaded rods
and then turn on a knurled nut and
screw them tight onto the washers.
Slip on another washer onto both rods.
Summary of Contents for Megado 110
Page 2: ......