Getting Started
Access Levels Key
Navigates you to the Access Levels options so that you may change the level of access
you currently are using. You will need to enter the correct password set for the level
you wish to access.
OK / Enter Key
Used when you want to select a menu option to change its value and then to confirm
and implement the change.
Indicators
System Fault LED
When the LED is lit, this indicates a system fault
Run Error LED
When the LED is lit, this indicates a run error.
Inspecting LED
When the LED is lit, this indicates that the system is inspecting.
Displays
Threshold / Signal Display
The top part of the display shows the signal, together with the
threshold above
which
packs will be rejected. The signal is
updated continuously as the signal
changes.
The bottom part of the screen displays the number and name
of the currently selected product. It also shows the top level
Menus option.
Bargraph Display
The bargraph display shows the signal in bargraph form, with
the
threshold
point
represented by a fixed vertical bar
approximately three-quarters of the way along the
display.
Using the Menus
The options for setting up, learning a product and checking the operation of the metal detector are
accessed through the Menu Soft Keys. See the
The menus available to you depend on the access level that you are currently logged in at.
When the LED is lit on a
Soft Menu Key
or
Menu Navigation Key
, this indicates that the key is
active and can be selected to display a new menu, menu option or to change a menu option value.
Selecting a Menu
■
Press the active
Soft Menu Key
directly under the displayed option you wish to select.
Editing a Menu Option
An asterisk (
*
) indicates a menu option that can be edited.
After pressing the
OK / Enter Key
to select the menu option
for editing, an arrow points to the value being edited.
62
Summary of Contents for IQ3
