manualshive.com logo in svg

Loma IQ3, User Manual

The Loma IQ3 User Manual is an essential guide to optimize the performance of your Loma IQ3 product. This comprehensive manual covers every aspect of operating and maintaining the IQ3, providing valuable insights and troubleshooting tips. Download it for free at manualshive.com and unlock the full potential of your Loma IQ3 product.

Share
Download
background image

Maintenance

 

Adjusting the Drive Chain Tension 

The conveyor belt drive chain is tensioned by undoing the four bolts holding the motor and moving the 
motor until the correct tension of 5mm maximum free play at the central point between the pulleys is 
achieved. 

Adjusting the Reject Devices 

Pusher and Retracting Band Rejects 

At the reject solenoid valve, adjust the two throttle screws, in conjunction with the reject delay and 
dwell times set in the Rejects Setup screen, until the required reject timing and speed of operation are 
obtained. Both the reject timing and the speed of operation are affected by the air pressure supplied 
to the conveyor. 

Air Blast Reject 

Since this type of reject has no throttles, the only variables that can be adjusted are the reject delay 
and dwell times set in the Rejects Setup screen. There is no air regulator supplied as standard with 
the air blast reject. However, the air supply pressure should be approximately 100psi (6.9 bar). 

Software Upgrades 

This section provides details for upgrading the IQ

3

 Metal Detector software. 

Pre-requisites for upgrading are a copy of the latest software and help files, and a USB memory stick 
which is used to import the latest software, overwriting the existing software installed on the machine. 

The following files are required and are available from Loma systems: 

■

 

IQ3_vX.X.X.Xs.hex

 – This file contains the operating software for the metal detector. The s in 

the file name signifies that it can be installed on systems that only have 2 x 2 MB (4 MB) flash 
ROMs fitted in positions U1 and U2 on the Control Board. 

■

 

IQ3_vX.X.X.X.hex

 – This file contains the operating software for the metal detector. It can be 

installed on systems that have an 8 MB flash ROM fitted in position U5 on the Control Board. 

■

  

IQ3_Plus_vX.X.X.X._zip

 - This file contains the GUI software required to operate the touch 

screen. 

■

 

 

Matching HEX and GUI codes.txt

 – This file can be opened in Notepad and provides 

additional information covering software versions, including a cross reference table between 
the Hex Code file versions and their matching GUI Code files to ensure that compatible 
versions of each file are installed. 

■

 

Help_vX.X.X.X.zip

 – This zipped folder contains a number of language sub-folders which 

each contain translated help text files. The set of files used by the software depends on the 
language selected in the Language Setup screen when setting up the metal detector. 

 

The Xs used in the file names above have been used to substitute the version numbers. So 
for example the current GUI software version is IQ3_Plus_v1.9.2.10._zip at the time of 
writing this document. 

1.

      

Obtain a copy of the applicable upgrade files for your system from Loma Systems. 

2.

      

Insert a USB memory stick into your PC and copy the following files onto it: 

IQ3_vX.X.X.Xs.hex 

IQ3_vX.X.X.X.hex 

3. 

 

Create a new folder on the USB memory stick called 

IQ3_Plus_vX.X.X.X

 using the version 

numbers on the source file. 

128 

Summary of Contents for IQ3

















































































































































Reviews:

No comments

Related manuals for IQ3

olympia electronics BS-375/WP/A Manual preview
BS-375/WP/A
Brand: olympia electronics Pages: 7
Heathkit GD-48 Instruction Manual preview
GD-48
Brand: Heathkit Pages: 7
Tecnogas CD-99 Quick Start Manual preview
CD-99
Brand: Tecnogas Pages: 2
Perel CMD001N User Manual preview
CMD001N
Brand: Perel Pages: 42
Teknetics TreasureTek Elite Owner'S Manual preview
TreasureTek Elite
Brand: Teknetics Pages: 12
Teknetics Tek-Point Owner'S Manual preview
Tek-Point
Brand: Teknetics Pages: 20
Whites Coinmaster GT Owner'S Manual preview
Coinmaster GT
Brand: Whites Pages: 16
Valetine One V1 Owner'S Manual preview
V1
Brand: Valetine One Pages: 40
TUYA WiFi-708 Quick Start Manual preview
WiFi-708
Brand: TUYA Pages: 2
K40 Defuser EX Installation Instructions preview
Defuser EX
Brand: K40 Pages: 4
White’s Electronics Coin Master PRO User Manual preview
Coin Master PRO
Brand: White’s Electronics Pages: 4
White’s Electronics Beachcomber Operating Instructions Manual preview
Beachcomber
Brand: White’s Electronics Pages: 9
Kane CD100A Operating Instructions Manual preview
CD100A
Brand: Kane Pages: 9
Samon FLSJ1263A User Manual preview
FLSJ1263A
Brand: Samon Pages: 40
LEGRAND 675 28 Quick Start Manual preview
675 28
Brand: LEGRAND Pages: 8
Bushnell Velocity 101911 Instructions preview
Velocity 101911
Brand: Bushnell Pages: 2
WatchGas PDM PRO CO2 Service Manual preview
PDM PRO CO2
Brand: WatchGas Pages: 6
Scanner TX-1001B Operation Manual preview
TX-1001B
Brand: Scanner Pages: 2

Brands by name

Popular brands

Load more brands