Loma IQ3 User Manual Download | Manualshive

Page: 36 / 144

background image

Safety First

Work Instructions, Training and Record Keeping

It is recommended that in line detector performance testing is covered by written instructions, thus
ensuring a clear and consistent approach by operators at all times and providing the means to
substantiate your methods to any assessment body who may ask.

It is recommended that all personnel who may conduct testing are suitably trained to do so and
records are kept to substantiate that training.

Accurate, easily retrievable records should be kept in a safe place for a defined period.

End User Licence Agreement

The software used within the IQ

3

Metal Detector is protected by copyright laws and international

copyright treaties. The software in the IQ

3

Metal Detector is licensed not sold.

1. Grant of Licence:

Loma Systems shall at all times have and retain title and full ownership of all software, firmware
programming routines, documentation supplied for use with the equipment and of all copies thereof
made by Buyer (collectively “software”).

Loma Systems grants the Buyer a non-exclusive and non-transferable license to use such software
solely for use with the equipment.

The Buyer shall take all reasonable steps to protect Loma Systems proprietary interest in the software
and shall not transfer or otherwise provide or sub-licence the software to any third party.

2. Rights and Limitations:

The software is licensed as a component within the IQ

3

Metal Detector only, and may not be

separated for use elsewhere.

The software is licensed with the IQ

3

Metal Detector as a single integrated product. The software may

only be used with the IQ

3

Metal Detector.

You may not rent of lease the software.

You may permanently transfer all of your rights under this EULA only as part of a sale or transfer of
the IQ

3

Metal Detector, provided you retain no copies, you transfer all of the software and the recipient

agrees to the EULA.

3. Patents:

The following patents associated with the design of Loma Systems metal detectors have been
granted:

■

GB2499239B

■

GB2506931B

26

«
...
34
35
36
37
38
...
»

Summary of Contents for IQ3

















































































































































Reviews:

No comments

Related manuals for IQ3

SPX 5500 14 BAND

Brand: Cobra Pages: 15

WHIXTR130 - XTR-130 Laser/Radar Detector

Brand: Whistler Pages: 9

Total Band Protection XTR-475

Brand: Whistler Pages: 9

Brand: Whistler Pages: 19

Brand: REX Pages: 12

110-495-101-XLS

Brand: 3M Pages: 33

M-59 Treasure Master

Brand: White’s Electronics Pages: 8

Coinmaster 2/DB

Brand: White’s Electronics Pages: 8

Brand: White’s Electronics Pages: 32

Brand: White’s Electronics Pages: 29

Brand: Kane Pages: 9

Brand: Notsi Pages: 17

Brand: Metal Defender Pages: 21

Brand: C-SCOPE Pages: 13

Brand: Elektral Pages: 2

Brand: Elektral Pages: 50

Brand: Elektral Pages: 61

Brand: DTI Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands