3. Loading Filament
Return to the home screen and tap
on the center icon.
When the two icons on the right are
activated, you can load/unload the
filament.
Keep pressing the upper right icon
(load) until you see filament coming
out through the nozzle.
Tap on ‘Y’ button to return to the
home screen.
When you see the screen change
like this, tap on the upper left icon
to heat up the hot end.
When using LOCOOP filament, put
the enclosed plastic cap as shown in
the left image.
Place a filament on
the turn table at the top of the
machine. Push down the red spring
presser and insert the tip of the
filament into the extruder hole.
Keep pressing the spring presser
and inserting filament until you can
feel the tip of filament hit the end of
tube.
22
LOCOOP Y USER MANUAL | www.locoop.net
Summary of Contents for Y
