5. Stop & Resume
Once the printing begins, the screen
will change like this. Here, you can
check how long the machine has
been printing and how far the print
has progressed (%).
You can tap on ‘stop’ icon on the far
right to bring the print to a halt.
If you choose to replace filament,
the screen will change to this. Press
down on load/unload icon on the
right. At this time, the end-effector
moves to the position where it is
easy to replace the filament.
You can use this function to print an
object in multiple colors.
When you tap on the ‘Stop’ button,
the screen will change to this.
Tap on the left icon to resume
printing, the center icon to replace
filament, and the right icon to stop
completely.
After printing, the screen will show
the total time spent as seen in the
left image. Tap anywhere to return
to the home screen.
The same screen will appear when
you stop printing.
24
LOCOOP Y USER MANUAL | www.locoop.net
Summary of Contents for Y
