LMI Technologies Gocator 2300 Series, User Manual

Page: 380 / 431

Gocator 2300 & 2880 Series
Tools and Native Drivers • CSV Converter Tool • 380
Register
Address
Name Read/Write Length (bytes) Description
320 Transformatio
n X offset
RO 4 Return the sensor transformation X offset
324 Transformatio
n Z offset
RO 4 Return the sensor transformation Z offset
328 Transformatio
n Angle
RO 4 Return the sensor transformation angle
332 Transformatio
n Orientation
RO 4 Return the sensor transformation orientation
336 Clearance
distance
RO 4 Return the sensor clearance distance
XML Settings File
The settings file, Go2GenTL.xml, resides in the same directory as the Gocator GenTL driver. Users can set
the resample mode and output format by changing the setting in this file.
Element Type Description
ResampleMode 32u Settings to disable or enable resampling mode:
0 – Disable
1 – Enable
When resampling mode is enabled, the GenTL driver will resample the
height map so that the pixel spacing is the same in the X and Y axis. The
default value is 1.
DataFormat 32u Settings to choose 16-bit RGB or 16-bit grey scale image output:
0 – 16-bit RGB Image
1 – 16-bit grey scale Image
The default value is 0
CSV Converter Tool
After you have exported recorded data to CSV, you can use the Gocator CSV Converter Tool to convert
the exported profile or part data into the following formats:
l
ASCII (XYZI)
l
16-bit BMP
l
16-bit PNG
l
GenTL
l
OBJ
l
STL