Before using for the first time
First of all take out the septic tank, as described
on the next page, and place it upright on the floor.
Swivel the drain connection piece upwards and
unscrew the cap. Measure out the toilet chemicals
in accordance with the manufacturer’s specifica-
tion, and pour in approx. 2 litres of water.
Environmental tip
When measuring out the chemicals, follow the
manufacturer’s specification exactly. Under no
circumstances use too many chemicals, as this
could cause unnecessary damage to the bacterial
cultures in municipal sewage treatment plants.
Lock the drain connection piece, swivel the con-
necting piece downwards and push the septic
tank back into its holding device.
WC model (1)
The waste water is collected in a special 17-litre
capacity septic tank. The level indicator (3) lights
up when the septic tank needs to be emptied.
1 – flush button
2 – control lever for the piston valve
3 – level indicator (septic tank)
Water flushing WC model (1)
The water flush receives the necessary supply of
water from the fresh water tank or from the sub-
terranean water supply connection, if applicable.
Flushing is initiated by pressing the flush button
(1). If at the same time the slide control (2) is acti-
vated in the direction of the arrow, the toilet base
opens up and the waste water flows into the
septic tank, while the flush cleanses the toilet. To
terminate flushing, release the flush button (1) and
close up the toilet base again by activating the
slide control (2) once more.
18
