Ventilator windows
The side, front and rear windows (depending on
the design) can be opened at the top to provide
ventilation. They are supported on the side and
can be adjusted universally.
To open
The window is continuously adjustable.
– Rotate lock (1) by 90º to the left or right.
– Push window outwards and move into the de-
sired position.
– Tighten locking screw (knob) on the positioning
lever.
To close
– Release locking screw (knob) (2).
– Shut window.
– Rotate lock (1) to the right or left.
Warning!
Danger of injury/accident!
For safety reasons all ventilator windows must be
closed while travelling and firmly placed in posi-
tion by rotating the bolt.
Sliding windows
– Release lock (1) and push window to the de-
sired position (
open
).
– Push window until you can hear it engage in
position (
closed
)
Multi-function roller blind
To open
– Pull blackout blind (1) with the grip recess plate
downwards out of the locking mechanism and
slide the blind upwards.
– Pull insect protection blind (2) with the grip
recess plate downwards out of the locking
mechanism and slide the blind upwards.
To close
– The blackout blind (1) can be set in three differ-
ent positions.
– Pull insect protection blind (2) right down and
lock in position.
– Then pull the blackout blind right down and lock
in position.
Warning!
Always move blinds by hand and do not allow
to shoot upwards, as otherwise damage could
occur.
11
