Roof light extension
To open
– The roof light can be adjusted to one of three
positions (max. opening angle approx. 70º).
– Rotate locking swivel bolt (1) by 90º towards the
left or right.
– Push dome-shaped roof light upwards to the
desired position.
To close
– Pull dome-shaped roof light downwards
– Rotate locking swivel bolt (1) by 90º towards the
left or right until the closing clamps are aligned
centrally in the frame.
– The upper slot is for the forced ventilation.
– The lower slot is used to close the roof light.
Roof light blind
– Pull insect protection blind (2) to the stop po-
sition.
– Snap guide bar into position.
– Blackout slats (3) can be closed and opened in
different positions by pushing forward and
backwards.
Lift-up tilting roof (optional extra)
To open
– Press locking button (1) on both of the rotating
bolts located on the glass and rotate by approx.
90º.
– Grasp bow-type handle (2) in the centre and
release from the anchoring.
– Swing bow-type handle downwards and press
glass dome upwards.
– Lock bow-type handle again by swinging round
on to the glass dome.
To close
– Release bow-type handle from the anchoring
and raise slightly.
– Swing bow-type handle inwards and pull glass
dome down.
– Rotate both swivel bolts by approx. 90º and
lock.
12
