LiteOn EVO 8000 Series, User Manual

Page: 72 / 169

69
Parameter Name Description Setting Range
2
∶
Feedback Low /High Fault
A fault will cause the drive to stop the motor.
3
∶
Multi-Function Output only when PID is
Disabled
Same action as b5-11=0.
4
∶
Feedback Low /High Alarm (detection disabled
when PID is disabled)
5
∶
Feedback Low /High Fault (detection disabled
when PID is disabled)
6 : Multi-function output, no light faults continue
to operate
7 : Multi-function contacts only (non-operational
detection is still valid)
b5-12
PID Feedback Low
Detection Level
Sets the PID feedback level used for detection.
When the PID feedback falls below this level for
longer than the time set to b5-13, PID feedback
loss will be detected.
Default
∶
0%
Min.: 0%
Max.: 100%
b5-13
PID Feedback Low
Detection Time
Sets the PID feedback time used for detection.
When the PID feedback falls below the level set to
b5-12 for longer than this time, PID feedback loss
will be detected.
Default
∶
1.0 s
Min.: 0.0 s
Max.: 25.5 s
b5-14
PID Sleep Start
Level
Sets the PID level to trigger the drive to sleep.
Default
∶
0.0Hz
Min.: 0.0 Hz
Max.: <5>
b5-15
PID Sleep Delay
Time Sets the delay time used to activate/deactivate
the PID Sleep function.
Default
∶
0.0 s
Min.: 0.0 s
Max.: 25.5 s
b5-16
PID Command
Acc./Dec. Time Sets the PID command acceleration /deceleration
time used for PID target.
Default
∶
0.0 s
Min.: 0.0 s
Max.: 20.0 s
b5-17 PID Target Selection
0
∶
PID Target Disabled
1
∶
PID Target Enabled
Default
∶
0
Min.: 0
Max.: 1
b5-18 PID Target Value
Sets the PID target value as a percentage of the
maximum output frequency when b5-17 is set to
1. Disabled when b5-17=0 Default
∶
0.00%
Min.: 0.00%
Max.: 100.00%
b5-19
PID Target Value
Units
0
∶
0.01Hz
1
∶
0.01% (Maximum Frequency is 100%)
2
∶
r/min. (Number of Motor Poles must be set)
3
∶
User Defined (Defined by b5-24 and b5-25)
Default
∶
1
Min.: 0
Max.: 3
b5-20 PID output lower The lower limit value can be set to avoid the Default
∶
0.0%