LiteOn EVO 8000 Series, User Manual

Page: 37 / 169

34
Chapter 4│Wiring
4.1 Wiring Safety
Danger

Turn off all the power to the equipment before wiring. Wiring during power on could cause
electrical shocks to personnel.

Allow only qualified personnel for installation, wiring, repairing and parts replacement.

Capacitors in the drive may still be charged for a short time after shutting off the power. Wait
for the amount of time specified on the drive before any maintenance.

Never touch input or output power cables. Do not connect any circuit to drive enclosure.
Warning

Properly connect the motor ground terminal. Contacts between the motor ground terminal and
motor enclosure could cause electrical shocks or a fire.

Ensure terminal screws are all tightened. Loose connection to the main circuit could cause
overheat or a fire.

Verify if the rated voltage of the drive matches the voltage of the incoming power supply
before applying power.

Perform all wiring as specified in the wiring diagrams provided when installing braking options.
Failure to comply could result in drive, braking components damage or a fire.

Do not disconnect the motor from the drive while the drive is outputting voltage.

Do not use unshielded cable for control circuit wiring. Failure to comply could cause abnormal
operation of drive.

Use shielded twisted-pair cables and connect the shield to ground terminal of the drive.

Do not modify the drive circuits. Failure to comply could cause drive damage.

Ensure all connections are correct after connecting the drive with other devices.