![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095149.webp)
149
•
Telnet—Users requesting access to the device that meets the Telnet access
profile criteria are permitted or denied access.
•
HTTP— Users requesting access to the device that meets the HTTP access profile
criteria, are permitted or denied.
•
Secure HTTP (HTTPS)—Users requesting access to the device that meets the
HTTPS access profile criteria, are permitted or denied.
•
SNMP—Users requesting access to the device that meets the SNMP access
profile criteria are permitted or denied.
•
Access Control—Select the action attached to the rule. The options are:
o
Permit—Permits access to the device if the user matches the settings in
the profile.
o
Deny—Denies access to the device if the user matches the settings in the
profile.
•
Interface—Select the interface attached to the rule. The options are:
o
All—Applies to all ports, VLANs, and LAGs.
o
Port—Rule applies to ports.
o
LAG—Rule applies to LAGs.
o
VLAN—Rule applies to VLANs.
•
Source IP Address—Select the type of source IP address to which the access
profile applies. The Source IP Address field is valid for a subnetwork. Select one of
the following values:
o
All—Applies to all types of IP addresses.
o
User Defined—Applies to only those types of IP addresses defined in the
fields.
•
IP Version—Enter the version of the source IP address: Version 6 or Version 4.
•
IP Address—Enter the source IP address.
•
IP Subnet Mask—Select the format for the subnet mask for the source IP address,
and enter a value in one of the fields:
o
Network Mask—Select the subnet to which the source IP address belongs
and enter the subnet mask in dotted decimal format.
o
Prefix Length—Select the Prefix Length and enter the number of bits that
comprise the source IP address prefix.
7.
Click
Apply
. The access profile is written to the Running Configuration file. You can now
select this access profile as the active access profile.