![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095043.webp)
43
•
Filter Name—Select the SNMP filter that defines the information contained in
traps (defined in the Notification Filter page).
3.
Click
Apply
. The SNMP Notification Recipient settings are written to the Running
Configuration file.
V3 Notification Recipients
To define a recipient in SNMPv3:
1.
Click SNMP > Notification Recipients SNMPv3.
This page displays recipients for SNMPv3.
2.
Enter the fields:
•
IP Version—Select either IPv4 or IPv6.
•
IPv6 Address Type—Select the IPv6 address type (if IPv6 is used). The options are:
o
Link Local—The IPv6 address uniquely identifies hosts on a single network
link. A link local address has a prefix of FE80, is not routable, and can be
used for communication only on the local network. Only one link local
address is supported. If a link local address exists on the interface, this
entry replaces the address in the configuration.
o
Global—The IPv6 address is a global Unicast IPV6 type that is visible and
reachable from other networks.
•
Link Local Interface—Select the link local interface (if IPv6 Address Type Link
Local is selected) from the pull-down list.
•
Recipient IP Address/Name—Enter the IP address or server name of where the
traps are sent.
•
UDP Port—Enter the UDP port used to for notifications on the recipient device.