![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095142.webp)
142
When DHCP Snooping is disabled for a VLAN, the binding entries that were collected for that
VLAN are removed.
If the database is full, DHCP Snooping continues to forward packets, but new entries are not
created.
To add entries to the DHCP Snooping Binding database:
1.
Click
Configuration > IP Network Operations > DHCP Snooping Binding Database
.
To see a subset of entries in the DHCP Snooping Binding database, enter the relevant
search criteria and click
Search
.
2.
To add an entry, click
Add
and enter the fields:
•
VLAN ID—VLAN on which a packet is expected.
•
MAC Address—MAC address of a packet.
•
IPv4 Address—IP address of a packet.
•
Interface—Type of interface on which a packet is expected.
•
Type—The possible field values are the following:
•
Dynamic—Entry has limited lease time.
•
Static—Entry was statically configured.
•
Lease Time—If the entry is dynamic, enter the amount of time that the entry is to
be active in the DHCP Database in User Defined. If there is no Lease Time, check
Infinite.)
3.
Click
Apply
. The settings are defined, and the device is updated.