![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095189.webp)
189
To define egress shaping per queue:
1. Click
Configuration > Quality of Service > Egress Shaping
.
The Egress Shaping page displays the rate limit and burst size for each queue.
2. Select an interface type (Port or LAG), and click
Search
.
3. Select a Port/LAG, and click
Edit
.
This page enables shaping the egress for up to four queues on each interface.
4. Select the Interface.
5. For each queue that is required, enter the following fields:
•
Queue x—Select to enable egress shaping on queue number x.
•
Committed Information Rate—Enter the maximum rate (CIR) in Kbits per second
(Kbps). CIR is the average maximum amount of data that can be sent.
•
Committed Burst Size—Enter the maximum burst size (CBS) in bytes. CBS is the
maximum burst of data allowed to be sent even if a burst exceeds CIR.
6. Click
Apply
. The bandwidth settings are written to the Running Configuration file.
Basic QoS
In QoS Basic mode, a specific domain in the network can be defined as trusted. Within that
domain, packets are marked with 802.1p priority and/or DSCP to signal the type of service they
require. Nodes within the domain use these fields to assign the packet to a specific output queue.
The initial packet classification and marking of these fields is done in the ingress of the trusted
domain.