![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095024.webp)
24
2.
Enter these parameters:
Clock Source
•
SNTP-If you enable this, the system time is obtained from an SNTP server.
To use this feature, you must also configure a connection to an SNTP server in the
SNTP Unicast Server page.
•
SNTP Client Unicast-Select to enable client Unicast mode.
•
SNTP IPv4 Multicast Rx-Select to receive SNTP IPv4 Multicast synchronization
packets requesting system time information. The packets are transmitted to all
SNTP servers on the subnet.
•
SNTP IPv4 Anycast Tx-Select to transmit SNTP IPv4 Anycast synchronization
packets requesting system time information. The packets are transmitted from
any SNTP servers on the subnet.
•
SNTP IPv6 Multicast Rx-Select to receive SNTP IPv6 Multicast synchronization
packets requesting system time information. The packets are transmitted to all
SNTP servers on the subnet.
•
SNTP IPv6 Anycast Tx-Select to transmit SNTP IPv6 Anycast synchronization
packets requesting system time information. The packets are transmitted from
any SNTP servers on the subnet.
•
Manual Date/Time-Set the date and time manually. The local time is used when
there is no alternate source of time, such as an SNTP server.
Time Zone
•
Time Zone from DHCP-Select to enable dynamic configuration of the time zone
and the DST from the DHCP server. Whether one or both of these parameters can
be configured depends on the information found in the DHCP packet. If this option
is enabled, you must also enable DHCP client on the device. The DHCP Client
supports Option 100 providing dynamic time zone setting.
•
DHCP Time Zone-Displays the acronym of the time zone configured from the
DHCP server. This acronym appears in the Actual Time field.
•
Time Zone Offset-Select the difference in hours between Greenwich Mean Time
(GMT) and the local time. For example, the Time Zone Offset for Paris is GMT +1,
while the Time Zone Offset for New York is GMT - 5.
•
Time Zone Acronym-Enter a user-defined name that represents the time zone you
have configured. This acronym appears in the Actual Time field.
Daylight Savings Time
Select to enable Daylight Saving Time.
•
Time Set Offset-Enter the number of minutes offset from GMT ranging from1-
1440. The default is 60.