69
LLDP MED Ports
The LLDP MED Ports page enables the selection of the LLDP MED TLVs and/or the network
policies to be included in the outgoing LLDP advertisement for the desired interfaces. Network
Policies are configured using the LLDP MED Network Policy page.
To configure LLDP MED on each port:
1.
Click
Configuration > Port Management > Discovery – LLDP > LLDP MED Ports
.
This page displays the following LLDP MED settings for all ports (only fields not described
in the Edit page are listed):
•
Location—Whether Location TLV is transmitted.
•
PoE—Whether POE-PSE TLV is transmitted.
•
Inventory—Whether Inventory TLV is transmitted.
2.
The message at the top of the page indicates whether the generation of the LLDP MED
Network Policy for the voice application is automatic or not. Click on the link to change the
mode.
3.
To associate additional LLDP MED TLV and/or one or more user-defined LLDP MED
Network Policies to a port, select it, and click
Edit
.
4.
Enter the parameters:
•
Port—Select the interface to configure.
•
LLDP MED Status—Enable/disable LLDP MED on this port.
•
Available Optional TLVs—Select the TLVs that can be published by the device by
moving them from the Advertise Optional TLVs list.