![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095044.webp)
44
•
Notification Version—Select SNMP v3.
•
Notification Type—Select whether to send traps or informs. If both are required,
two recipients must be created.
•
Timeout—Enter the amount of time (seconds) the device waits before re- sending
informs/traps. Timeout: Range 1-300, default 15.
•
Retries—Enter the number of times that the device resends an inform request.
Retries: Range 1-255, default 3.
•
User Name—Select from the drop-down list the user to whom SNMP notifications
are sent. In order to receive notifications, this user must be defined on the SNMP
User page, and its engine ID must be remote.
•
Security Level—Select how much authentication is applied to the packet.
Note
—The Security Level here depends on which User Name was selected. If this
User Name was configured as No Authentication, the Security Level is No
Authentication only. However, if this User Name has assigned Authentication and
Privacy on the User page, the security level on this screen can be either No
Authentication, or Authentication Only, or Authentication and Privacy.
The options are:
o
No Authentication—Indicates the packet is neither authenticated nor
encrypted.
o
Authentication—Indicates the packet is authenticated but not encrypted.
o
Privacy—Indicates the packet is both authenticated and encrypted.
•
Notification Filter—Select to enable filtering the type of SNMP notifications sent
to the management station. The filters are created in the Notification Filter page.
•
Filter Name—Select the SNMP filter that defines the information contained in
traps (defined in the Notification Filter page).
3.
Click
Apply
. The SNMP Notification Recipient settings are written to the Running
Configuration file.
Logs
Each log is a set of messages describing system events. The device generates the following local
logs:
•
Log sent to the console interface.
•
Log written into a cyclical list of logged events in the RAM and erased when the device
reboots.
•
Log written to a cyclical log-file saved to the Flash memory and persists across reboots.