![background image](http://html1.mh-extra.com/html/linksys/lgs308/lgs308_user-manual_1925095091.webp)
91
3.
Enter the values for the following fields:
•
Telephony OUI—First six digits of the MAC address that are reserved for OUIs.
•
Description—User-assigned OUI description.
Note
—Click
Restore
to delete all of the user-created OUIs, and leave only the default
OUIs in the table. The OUI information may not be accurate until the restoration is
completed. This may take several seconds. After several seconds have passed, refresh
the page by exiting it and re-entering it.
To delete all the OUIs, select the top checkbox. All the OUIs are selected and can be
deleted by clicking Delete. If you then click Restore, the system recovers the known OUIs.
4.
Click
Apply
. The OUI is added to the Telephony OUI Table.
Telephony OUI Interfaces
QoS attributes can be assigned per port to the voice packets in one of two modes:
•
All—Quality of Service (QoS) values configured to the Voice VLAN are applied to all of the
incoming frames that are received on the interface and are classified to the Voice VLAN.
•
Telephony Source MAC Address (SRC)—The QoS values configured for the Voice VLAN
are applied to any incoming frame that is classified to the Voice VLAN and contains an OUI
in the source MAC address that matches a configured telephony OUI.
Use the Telephony OUI Interface page to add an interface to the voice VLAN on the basis of the
OUI identifier and to configure the OUI QoS mode of voice VLAN.