182
Feature Configuration
The Feature Configuration page contains fields for setting the QoS mode for the system (Basic, or
Disabled, as described in the “QoS Modes” section). In addition, the default CoS priority for each
interface can be defined.
To select the QoS mode:
1. Click
Configuration > Quality of Service > Feature Configuration
.
2. Set the QoS mode. The following options are available:
•
Disable—QoS is disabled on the device.
•
Basic—QoS is enabled on the device in Basic mode.
3. Select Port/LAG and click Search to display/modify all ports/LAGs on the device and their
CoS information.
The following fields are displayed for all ports/LAGs:
•
Interface—Type of interface.
•
Default CoS—Default VPT value for incoming packets that do not have a VLAN
Tag. The default CoS is 0. The default is only relevant for untagged frames and
only if the system is in Basic mode and Trust CoS is selected in the Basic QoS
page.
4. Click
Apply
. The Running Configuration file is updated.
To set QoS on an interface:
1. Select an interface, and click
Edit
.