Link XP L2102/L2104 Receiver Instruction Manual Issue 1 - October 2003 Page 41 of 48
Link Research Ltd. 23/24 Watford Metro Centre, Dwight Road, Watford, Hertfordshire, WD18 9XA, England. Tel: +44 (0) 1923 200 900
Registered in London No. 2074604
Web:
www.linkres.co.uk Fax: +44 (0) 1923 241 357
L2102 & L2104 Receiver
Instruction Manual
o
Pin 2 Audio 1 L-
o
Pin 3 ground
o
Pin 4 Audio 1 R+
o
Pin 5 Audio 1 R-
Video Outputs
•
Serial Digital Interface (SDI)
o
SDI with two stereo channels of embedded audio
o
SMPTE 259M, Rec ITU-R BT.656.3
•
Composite Video
o
NTSC (with and without pedestal) or PAL I
o
REC. ITU-R BT.470-4
o
Signal to noise ratio >56dB
•
ASI out
o
DVB ASI Burst and Byte mode
•
Component video
o
YUV 625/525
Video Inputs
•
Frame Lock
o
Composite Black and Burst input for timing reference
o
Frame store added
o
Delay increased by 0 – 40mS
Analogue Audio Output
•
Two stereo pairs or 4 mono channels
o
MPEG layer 1 and layer 2
o
Bit rates 32 to 448kbits/sec
o
48kHz sampling
o
Clip level 18dBm
o
THD < 0.1%
o
20Hz to 18kHz ±0.25dB
o
Crosstalk >60dB minimum
o
Signal to noise ratio >66dB RMS
Input Signal Level
•
Receiver sense limit –80dBm
•
Receiver overload limit –20dBm
