Link XP L2102/L2104 Receiver Instruction Manual Issue 1 - October 2003 Page 7 of 48
Link Research Ltd. 23/24 Watford Metro Centre, Dwight Road, Watford, Hertfordshire, WD18 9XA, England. Tel: +44 (0) 1923 200 900
Registered in London No. 2074604
Web:
www.linkres.co.uk Fax: +44 (0) 1923 241 357
L2102 & L2104 Receiver
Instruction Manual
Section 1 – Getting Started and
Basic Operation
1.1
Getting Started
1.1.1 Which model do I have?
L2102 has two F-type RF inputs on the rear whereas L2104 has four. Mains powered
versions have a three-pin IEC mains inlet socket: DC powered versions have a 4-pin XLR
input plug.
1.1.2 Controls and connections
STATUS
ALARM
POWER
L2100 DIVERSITY IRD - Ultra Low Delay
CJM2 Technology
Figure 1 – Controls and displays – L2102 and L2104
Control/Display
Function
Enter button
Allows downward navigation of the menu system
Stores system parameters after they have been set
Exit button
Allows upward navigation of the menu system
Cancels any parameter changes made restoring the
previously stored value
Up button
Allows upward navigation in a sub menu.
Down button
Allows downward navigation in a sub menu.
Left button
Returns the user to a higher-level menu and allows
movement to the left when changing parameters within a
menu setting.
Right button
Allows movement to the right when changing parameters
within a menu setting.
LCD window
Displays menu settings and system status
IR window
Allows receiver set-up using remote infra red controller
Status LED (yellow)
When lit, the receiver is locked to a signal.
Alarm LED (red)
When lit, an alarm has been detected. For details enter
the alarm menu.
Power LED (green)
When lit, power is applied to the receiver.
Left
button
Enter
button
LED indicators
Up button
Liquid crystal
display
IR remote control
sensor
Exit button
Down
button
Right
button
