Link XP L2102/L2104 Receiver Instruction Manual Issue 1 - October 2003 Page 40 of 48
Link Research Ltd. 23/24 Watford Metro Centre, Dwight Road, Watford, Hertfordshire, WD18 9XA, England. Tel: +44 (0) 1923 200 900
Registered in London No. 2074604
Web:
www.linkres.co.uk Fax: +44 (0) 1923 241 357
L2102 & L2104 Receiver
Instruction Manual
•
55mm x 20mm liquid crystal display (LCD) showing menu items, status
and alarms
•
3 light emitting diodes (LED) showing status
o
Power – green – when lit power is applied
o
Alarm – red – when lit an alarm raised (details on the LCD)
o
Status – yellow – when lit a valid input signal is present
Rear Panel Connectors
•
RF1, RF2, (for L2102) RF3 and RF4 (for L2104) inputs
o
75
Ω
F connector
o
Diversity input, antenna 1 to RF 1 and antenna 2 to RF2
o
Dual diversity input antenna 3 to RF3 and antenna 4 to RF4
o
UHF input 470MHz to 860MHz
o
+24VDC output to power up convertor limited to 400mA per
connector
o
Short circuit protected
•
Frame lock input
o
75
Ω
BNC connector
•
ASI out
o
75
Ω
BNC connector
•
SDI out
o
75
Ω
BNC connector
o
Serial digital video with embedded audio
•
Video out
o
75
Ω
BNC connector
o
Composite video out 1V pp
o
PAL or NTSC
•
Remote/Alarm/Data (L2104)
o
9 way D-sub connector
o
Alarm output
o
Remote control port
o
RS232 data output
o
Baud rates of 9K6, 19K2, 38K4
o
Firmware download port
Audio Output (option choice between 5 way XLR or 12-way connector block)
•
12 way connector block (numbered from the left)
o
Pin 1 Audio 1 L+
o
Pin 2 Audio 1 L ground
o
Pin 3 Audio 1 L-
o
Pin 4 Audio 1 R+
o
Pin 5 Audio 1 R ground
o
Pin 6 Audio 1 R-
o
Pin 7 Audio 2 L+
o
Pin 8 Audio 2 L ground
o
Pin 9 Audio 2 L-
o
Pin 10 Audio 2 R+
o
Pin 11 Audio 2 R ground
o
Pin 12 Audio 2 R-
•
5-way XLR Audio 1
o
Pin 1 Audio 1 L+
o
Pin 2 Audio 1 L-
o
Pin 3 ground
o
Pin 4 Audio 1 R+
o
Pin 5 Audio 1 R-
•
5-way XLR Audio 2
o
Pin 1 Audio 1 L+
