Link XP L2102/L2104 Receiver Instruction Manual Issue 1 - October 2003 Page 4 of 48
Link Research Ltd. 23/24 Watford Metro Centre, Dwight Road, Watford, Hertfordshire, WD18 9XA, England. Tel: +44 (0) 1923 200 900
Registered in London No. 2074604
Web:
www.linkres.co.uk Fax: +44 (0) 1923 241 357
L2102 & L2104 Receiver
Instruction Manual
1.
Firmware Versions Supported by this Manual
The following firmware versions are supported by this manual:
•
L2102/2104
Version
1.9
The latest firmware versions and details of how to download them can be found on the Link
Research web site:
www.linkres.co.uk
2.
About this manual
This manual is divided into 3 sections:
•
Section 1 –
Getting started and basic operation
. This will enable Users to set up
the system and get it running. A trouble-shooting guide is included.
•
Section 2 –
More advanced operation
. This section gives detailed coverage of how
to change and store profiles including uploading/downloading files from a PC.
•
Section 3 –
Technical reference.
This section is intended mainly for support
engineers and covers the system’s technical specifications and software upgrades.
3.
Introduction
The Link Research L2102 and L2104 receivers are the first of a new generation of high
performance, low delay receivers. Designed for use with the LinkXP Wireless Camera
System or as a stand alone receiver it gives unrivalled performance in a very compact
footprint.
The system is very simple to set up using the front panel controls allowing rapid change of
frequency and system reconfiguration. In addition, the unit can be controlled by the hand-
held infra-red (IR) controller, L9020.
The internal design of the receivers is extremely compact using state-of-the-art
components and software giving a number of major advantages for the User.
•
The low component count leaves few parts to go wrong giving very high
system reliability.
•
All units in the system have been designed as part of an integrated family
ensuring the very best interoperability.
•
The design is so flexible that the LinkXP wireless camera system gives
Customers the best future proofed product on the market today.
•
Low power consumption ensures long operating times from each battery
before a change is needed.
•
The very cool running temperature and careful component choice lead to a
product that is designed not to fail.
Link aim to make product backup second-to-none. Link has extensive manufacturing
experience as well as full servicing capability of both it’s own and many other
manufacturers’ products. The full Link product range is stocked leading to short lead times
and fast field support from the factory in Watford.
Always refer to the Link Research website,
www.linkres.co.uk
, for the latest information.
A customer section, password protected, is available in the Support Area. Please contact
