D9U003VSX-0101_00
19
Fig. Base Cover Description
1
3
1
2
2
2
2
1
HEAD END
1. Safety Straps (to fix mattress on the Matress Platform)
2. Transport Handles
3. Aip Pipes
4.6 Transport Handles
WARNING!
Material damage and risk of injury due to incorrect use!
► Transport the mattress using transport handles without patient on it!
Transport handles are intended for transport of the mattress only.
4.7 SCU (System Control Unit)
The SCU (System Control Unit) is installed under the leg section of the bed frame. It is possible to have the Multicare X bed
delivered with the SCU factory-fitted, or to have it retrofitted by approved service personnel. OptiCare X ready Multicare X bed is
equipped with a dedicated power outlet for the SCU at the auxiliary power distribution point. The SCU is operated via the Integrated
Mattress Screen on the Multiboard X LCD touchscreen. There is no ON/OFF switch on SCU. The SCU is equipped with a compre
-
hensive alarm system which detects any problems with the system performance.
The alarm system
►
Gives audible and visual alarms via the Multiboard X if a problem requires immediate action.
►
Stores information for the service personnel to review later.
4.7.1 FIRMWARE
The system control unit includes firmware that can be updated only by an authorised service technician.
This firmware is protected against unauthorised access by mechanical housing (tool is needed to access) and by exclusive compa
-
tibility with an authorised software tool and specific cable.
