D9U003VSX-0101_00
14
OptiCare X for Multicare X
Additional Instructions for correct use:
►
Follow the instructions for use carefully.
►
Ensure any user has read and understood the instructions for use completely before operating the product.
►
Use OptiCare X integrated mattress system exclusively as specified in the instructions for use and in perfect working
order.
►
If necessary, check the OptiCare X functions daily or at each shift change.
►
Use the Multicare X bed exclusively with the correct mains supply.
►
Ensure that the OptiCare X integrated mattress system is operated exclusively by qualified personnel who have been
trained according to the instructions for use.
►
Ensure OptiCare X integrated mattress system is operated by qualified personnel trained in using the Multicare X bed
in accordance with the instructions for use by manufacturer or by person approved by the manufacturer, eventually by authorized
representative or by person approved by the authorized representative.
►
Ensure that the patient (health permitting) has been informed about the operation of the OptiCare X integrated mattress
system and all applicable safety instructions.
►
Contact service department of the manufacturer immediately to let it replace any damaged parts by the original spare
parts.
►
Ensure that maintenance and installation are performed exclusively by qualified personnel who have been trained by the
manufacturer.
►
During unavoidable excess loads (e. g. CPR), adjust bed mattress support platform with OptiCare X integrated mattress
system to the lowest position.
►
Ensure that only one adult patient lies on the OptiCare X mattress at any time.
►
To avoid injury or crushing, take extra caution when operating any moving parts of the Multicare X bed.
►
When using lifting poles or infusion stands, ensure that OptiCare X integrated mattress system will not be
damaged when you move or adjust Multicare X bed.
►
Keep the Mattress support platform with OptiCare X integrated mattress system in the lowest position at any time when
the healthcare personnel are not treating the patient in order to prevent the patient from falling or injuries.
►
Ensure that siderails of Multicare X bed are operated exclusively by healthcare personnel.
►
Never handle the mains plug of Multicare X bed with wet hands.
►
Disconnect Multicare X bed from the mains exclusively by pulling the mains plug.
►
Disconnect Outlet Power cable from the mains exclusively by pulling the mains plug.
►
When pulling the mains plug, always hold the plug, not the cable.
►
Improper handling of mains cable can cause an electric shock hazard, other serious injuries or damage to OptiCare X
mattress system.
►
Ensure that the stipulated duty cycle of Multicare X bed is not exceeded.
►
To prevent failures, use exclusively the manufacturer’s original accessories.
►
Ensure that the stipulated safe working load is not exceeded.
►
If the patient‘s condition could lead to an entrapment, leave the mattress support platform with OptiCare X integrated
mattress system in the flat position whilst unattended.
►
Do not exceed the maximum patient weight limit of the Multicare X and of the OptiCare X integrated mattress system at
the same time.
►
Do not use the SCU near flammable gases. (This does not apply to oxygen cylinders.)
►
Do not hang anything on any cable.
►
Never use OptiCare X integrated mattress system near radiators or other heat sources.
►
After each emergency situation always check if any of the Multicare X controllers (controllers in siderails, handset or Atten
-
dant Control Panel) is not involuntarily pressed by the bed accessories or by the OptiCare X integrated mattress.
►
To avoid unintended activation of moving parts during any use of the bed always check that none of the control elements
of the Multicare X bed is pressed by persons, by OptiCare X integrated mattress or by other objects.
►
Never cover the SCU while in use.
►
Never cover the filter of SCU while in use.
