Lincoln Electric PIPEFAB CE, Operator'S Manual, Page: 76 / 100

PIPEFAB™ WELDING SYSTEM OPERATION
B-25
MEMORY OPERATION
FIGURE B.22
Memories can be saved for each welding process. These can be accessed by touching the applicable
memory bu
� on labeled one through four.
To save a memory, hold the desired memory loca � on down un �l the screen indicates the memory is
saved.
When one memory is selected the LED will be lit, if any se � ngs are changed the LED will go out. If the
memory bu � on is pressed again, the se � ngs will revert to the se � ngs saved in the memory.
Four memories each can be saved in the S � ck process, TIG process, MIG Le � Feedhead, MIG Right
Feedhead, FCAW Le � Feedhead, and FCAW Right Feedhead.
Memory usage with remotes – If a TIG process is saved with a remote control connected, the remote
control must be connected for the memory to be func�onal. If Memory Only Mode is not enabled,
a warning will appear and can be bypassed.