Lincoln Electric PIPEFAB CE, Operator'S Manual

Page: 60 / 100

PIPEFAB™ WELDING SYSTEM OPERATION
B-9
USER INTERFACE LAYOUT
FIGURE B.6
1. Process Adjustment Knob: Turn to adjust setpoint (dependent on the process).
2. Process Adjustment Knob: Turn to adjust setpoint (dependent on the process).
3. Menu Knob: Turn to scroll through the menu and press to select a highlighted op � on.
4. S � ck Bu � on: Press to set the system to S � ck mode. This will deac � vate all outputs besides the
s � ck output.
5. TIG Bu � on: Press to set the system to TIG mode. This will deac � vate all outputs besides the TIG
output.
6. MIG Bu � on: Press to set the system to MIG mode. This will deac � vate all outputs besides the
MIG output.
7. FCAW Bu � on: Press to set the system to FCAW mode. This will deac � vate all outputs besides
the FCAW output.
8. Memory Bu � ons: Memories can be saved for each welding mode. These can be accessed by
touching the applicable memory bu � on labeled one through four. To save a memory, hold the
desired memory loca � on down un �l the screen indicates the memory is saved.
9. USB Connector: A USB drive can be inserted to upload/download memories and update the user
interface so � ware.