4-37
Attention:
If the battery is to be removed, disconnect the negative lead, then the positive lead.
Connection should be done in reverse order of removal.
Re
placement of Fuse:
（
1
）
Before checking and replace the fuse, turn the ignition switch to “
” so as to prevent an accidental short circuit.
（
2
）
Remove the left side cover. The fuse is in the fuse box. Open the fuse box to replace the fuse and check it for tightness.
（
3
）
If the fuse burns out repeatedly, there is probably a overload circuit or short circuit . The problem must be located, and remedy it.
（
4
）
Replace a fuse of the same rating. Specification of fuse: 20A . Never replace with the different rated current fuse. Never use wire to take the place of fuse.
WARNING
：
Never use other material such as aluminium, iron or copper wire instead. Never connect the circuit with out the fuse. Otherwise the circuit
may be burnt.
（
5
）
Reinstall the parts in the reverse order of removal. Check all wire clamps are secure.
