4-4
4.1
CHARGING SYSTEM
4.1.1
●
The charging system consists of:
1
）
Battery(12V9Ah)
2
）
Magneto: AC permanent-magnet generator, magneto rotor and stator (including charging/lighting coil and exciter coil).
3
）
Rectifier with regulator: is of three-phases, full-wave switch type.
4
）
Fuse: chip fuse 20A, with a spare one.
The battery is connected with the magneto in parallel, and to the electric equipment with power.
4.1.2
●
Charging system is designed to supply the devices with power at the electric power that generator send out is enough, and charge toward the
b
attery for
storing a part of electric power. Therefore, make sure to supply the device with electric power when the generator runs at a lower speed or power is weak due heavy
load.
4.1.3
●
Removal, Installation and Maintenance of Charging System
Turn the key from to
to open the ignition switch. Turn the
stop switch to
。
Disconnect the rectifier coupler from the main cable, check
them for continuity. Replace the rectifier if necessary.
IGNITION SW.
RECTIFIE
R
STOP SW.
SOCKET OF RECTIFIER
AND MAIN CABLE
SOCKET OF MAGNETO
AND RECTIFIER
