2-23
11
）
Remove the gearshift drum, and check it for wear. Replace it if necessary.
12
）
Check the fork grooves in the gearshift drum for wear. Replace it if
necessary.
13
）
Measure the O.D. of gearshift fork shaft. If it is beyond the service limit,
replace the worn shaft with a new one.
Service limit:
＜
Φ
11.90mm
14
）
Measure the thickness of gearshift fork and I.D. of hole in the gearshift fork
by using a micrometer and an inside micrometer separately. If any one of them
is beyond the service limit, replace the fork.
Service limit of fork thickness: 4.8mm
Service limit of fork I.D.: Ф12.5mm
