2-26
23
）
Remove the washer II from the countershaft, and check it for wear. Replace
the washer if necessary.
24
）
Remove the countershaft 2
nd
gear, and then check it for wear. Replace the
worn gear if necessary.
Limit value of inner bore:
Φ
22.1mm
25
）
Remove the countershaft 5
th
gear, 4
th
gear and splined washer, then check
them for wear. Replace the worn-out part if necessary.
Limit value of inner bore:
Φ
20.1mm
26
）
Remove the washer from the mainshaft, and check it for wear. Replace it if
it is out of the limit.
Service limit: 0.8mm
