2-13
8
）
Unscrew and remove the fixing bolt M6
×
12 of valve rocker fixing plate and
remove the rocker.
Tightening torque of bolt: 8
～
12N.m
9
）
The construction of rocker holder is shown in following figure. Check the
rocker holder for excessive wear or inflexible rotation. Replace it if necessary.
Then remove the camshaft assembly. Check it for wear and replace it if
necessary.
。
10
）
Unscrew the bolt M6 of left crankcase cover and remove the left crankcase
cover. Tightening torque: 8
～
12N.m
11
）
Unscrew the bolt of magneto rotor. Remove the magneto rotor and gear with
specified equipment.
Bolt specification: M10
×
35
Tightening torque: 40
～
50N.m
