LG ACP IV ACP Owner'S Manual Download Page 30

Page: 30 / 181

ENGLISH

USING THE PROGRAM

Item

Description

Filter Alarm

Click(Touch) the Disable button to deactivate the filter exchange alarm.

(Model dependant.)

Partial Lock

[HardLock]

Button: Disables thermostat control for all features.

[Clear]

Button: All functions are unlocked.

[ModeLock]

Button: Disables thermostat control for local mode

setting.

[Clear]

Button: Mode is unlocked.

[FanLock]

Button: Disables thermostat control for local fan speed

setting.

[Clear]

Button: Fan speed is unlocked.

[TempLock]

Button: Disables thermostat control for local

temperature setting.

[Clear]

Button: Temperature setting is unlocked.

Set Temp Range

Click(Touch)

[▲]

[▼]

to set the temperature limit.

[2Setpoint]

[IDU 2Set]

Button Set functions in 2Setpoint or IDU 2set(US only Option)

NOTES

Depending on the installation site specifications, either the Auto Mode or 2Set Auto Mode

can be selected. Go to

Environment > Advance Setting > Auto Mode Option

and select a

desired auto mode type.

2Set Auto Mode option is only available in the U.S.

Summary of Contents for ACP IV ACP






















































































































































































Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands

LG ACP IV ACP, Owner'S Manual

Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands