LG ACP IV ACP Owner'S Manual Download Page 13

Page: 13 / 181

ENGLISH

SAFETY PRECAUTIONS

Periodically, check the product and do maintenance, especially if it has been running for

extended periods of time.

If the product is allowed to run for extended periods of time, the product may deteriorate causing

injury to the user.

Do not leave the product near a flower base, water bottle, or any other liquids.

It may cause fire or electric shock.

Transformer selection:

Select an insulating product that complies with IEC61558-2-6 and NEC Class 2.

In addition, consider the combined power consumption of the modules, accessories, and field
devices installed for the selection of an appropriate transformer.
Main module current: 24 V~, 850 mA

Use the provided adaptor when using DC 12 V. The adaptor is not provided with the ACS IV
Controller package sold in the U.S.

Summary of Contents for ACP IV ACP






















































































































































































Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands

LG ACP IV ACP, Owner'S Manual

Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands