LG ACP IV ACP Owner'S Manual Download

Page: 35 / 181

ENGLISH

USING THE PROGRAM

ERV

The following is the ERV control menu and features.

Item

Description

Operation

[ON]

Button: Starts the operation of the device.

[OFF]

Button: Stops the operation of the device.

GoTo

[Schedule

▶

]

Button: Move to

Schedule

menu.

Room

Display the current temperature.

Set Temperature

Click(Touch)

[▲]

[▼]

to set a desired temperature (the ERV is not activated).

Mode

[AUTO]

Button: Evaluates the operating environment conditions and

automatically sets the optimum temperature.

[HEX]

Button: Air supply and emissions are all ventilated through the heat

exchanger.

[NORMAL]

Button: Ventilate emissions without passing through the heat

exchanger.

Fan Speed

[LOW]

Button: Slow fan speed.

[HIGH]

Button: Fast fan speed.

[SUPER]

Button: Maximum fan speed.

[AUTO]

Button: Loops from low to high to super fan speeds.

[Apply]

Button

Apply control menu setting to the device

[Detail.

▶

]

Button Control details.

Summary of Contents for ACP IV ACP






















































































































































































Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands

LG ACP IV ACP, Owner'S Manual

Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands