LG ACP IV ACP Owner'S Manual Download

Page: 68 / 181

ENGLISH

USING THE PROGRAM

Configure the schedule information that controls the device.

Item

Description

Schedule Name

Click(Touch) the input box. Enter the name for the schedule.

Time

Click(Touch) the time area and then the

[+]

[-]

button to select the desired

time.

Click(Touch) the

[AM]

[PM]

button to select before or after midday.

Period

Click(Touch) the period area and then the

[+]

[-]

button to select the desired

period.

Repeat Program

Click(Touch) the Repetition Program area and select a desired program.

Select Day

: Selected days the schedule will be performed.

Once

: Applies a schedule once on a selected date.

Everyday

: Applies the same schedule Everyday.

Mon - Fri

: Applies a schedule repeatedly from Monday to Friday.

Mon - Sat

: Applies a schedule repeatedly from Monday to Saturday.

Select day

Click(Touch) a desired day to apply a schedule.

Summary of Contents for ACP IV ACP






















































































































































































Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands

LG ACP IV ACP, Owner'S Manual

Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands