LG ACP IV ACP Owner'S Manual Download Page 27

Page: 27 / 181

ENGLISH

USING THE PROGRAM

Device Control

You can control the devices as follows.

From the main menu, click(touch) the

[Control/Monitor]

menu icon.

Click(Touch) the device group you want to control from the group list.

• The monitoring screen for the device is displayed.

Click(Touch) the device you want to control.

• To select all devices, click(touch) the button at the top.
• The device control area appears at the bottom of the screen.

In the device control box, set the control status of the device.

• The device control box shows a different menu depending on the device. For information

about the control area for each device, refer to

Control Menu per Device

Once you have finalized the settings, click(touch) the

[Apply]

button.

Summary of Contents for ACP IV ACP






















































































































































































Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands

LG ACP IV ACP, Owner'S Manual

Search results

Summary of Contents for ACP IV ACP

Reviews:

Related manuals for ACP IV ACP

Brands by name

Popular brands