LG 22LY560M Commercial Mode Setup Manual Download Page 19

Page: 19 / 84

206-4261

(Continued on next page)

Ez Download Utility (Cont.)

(Continued from previous page)

4. To access the TV Manager / USB Download Menu from the TV menus:

• Press

MENU

on the Installer Remote to display the TV setup menus

(TV is in Pass-through Mode) or the Function Menu (TV is not in

Pass-through Mode).

• Use the arrow navigation keys to select/highlight either the

Option

menu icon from the TV setup menus or the

Lock

menu icon from the

Function Menu. Then, press the number “

” key a total of seven times.

5. With the TV Manager / USB Download Menu on display (see example

at right), use the Up/Down arrow keys to select

Ez Download

, and then

press

6. The Ez Download window contains a listing of the CPU (EPK), PTC, and

splash image (LOGO) files stored in the LG_DTV folder and the TLX and

TLL files stored in the root directory on the USB device.

To select or de-select a file, respectively, use the Up/Down arrows on

the Installer Remote to highlight the filename, and press

to add or

remove the checkmark at the left of the filename.

Note:

The utility will only allow you to select one of each file type for

downloading. For example, if there are two TLX files in the Ez Down-

load list, you can only select one or the other of those two files.

Note:

After an Ez Download is run, a file is created on the USB device,

which maintains a history of the files previously used for Ez Download.

The next time(s) you use this USB device for Ez Download, the files

you selected for the previous download will be pre-selected by default.

7. The fields at the right of the screen will change depending on the

currently highlighted file. Select the appropriate option(s) for each file,

as applicable:
• For software and splash image files: The fields at the right of the

screen show the TV software versions and any available Forced

Update options. Do not select any Forced Update options unless you

have been specifically instructed to do so or have previous experience

with Expert Software Updates.

• For TLX files: If an FTG Channel Map is included in the TLX file, a

Channel Tuning / Channel Banner Display field at the right of the

screen enables you to select the format for the channel tuning/banner

display. Press the green button on the Installer Remote to select

Logical

tuning, or press the yellow button on the Installer Remote

to select

Physical

tuning. A checkmark will appear at the left of the

selected option. Logical tuning is selected by default.

Note:

If a TLX file does not include an FTG Channel Map, the

message, “No Channel Map in TLX file,” will be displayed at the right

of the screen.

TV Manager

USB

Ez Download

Logo Image Download
Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)

Ez Download

[TLX] xxLY560M-UA00001.TLX
[LOGO] Splash Image 1920 X 1080 Pro

[EPK] xxLY560M_V03_11_USB.epk

[ TV Software Version ]

Current : 03.08.00.01 (CPU)

1.00.020 (PTC)

EPK : 03.11.00.01

[ Forced Update Option ]
SPI Boot
LG Boot Logo

Apply

Updating EPK File... 50 %

Do not remove the USB from the port! Do not unplug!

xxLY560M-UA00001.tlx

Splash Image1920 x 1080 ProC.jpg

xxLY560M_V03.11_USB.epk

Summary of Contents for 22LY560M





















































































Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands

LG 22LY560M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands