LG 22LY560M Commercial Mode Setup Manual Download Page 13

Page: 13 / 84

206-4261

Express Script Installer Menu Wizard (Cont.)

Configure Pro:Centric Settings

The next wizard screen enables you to set up the Pro:Centric feature of the TV. By default, the

Data Channel is configured for Auto Search, which enables the TV’s Data Channel Auto Search

feature to set the Data Channel value. See item 119 DATA CHANNEL description on page 30 for

further information on the Data Channel Auto Search feature. The Pro:Centric Mode default setting

is “Configuration Only,” which enables remote management only. That is, the TV will search for TV

E-Z Installation data downloads; however, Pro:Centric application data will not be downloaded, i.e.,

Installer Menu item 098 PRO:CENTRIC will be set to 0.
If you wish to proceed with the wizard without changing the default values for the Pro:Centric

settings, you can simply select

Next

and press

on the Installer Remote. Or, if you wish to exit

the wizard while retaining the default values for Pro:Centric settings, use the arrow keys on the

Installer Remote to select

Done

, and then press

If you already know the Pro:Centric settings that need to be configured in order for the TV to

connect to the Pro:Centric server and/or if the Pro:Centric server is not yet installed, follow the

procedure below to expedite the setup process. Use the Up/Down arrow keys on the Installer

Remote to navigate between the fields.

Note:

If you wish to disable the Pro:Centric feature of the TV, select the Data Channel field, and

then use the Left/Right arrow keys on the Installer Remote to select

Disabled

. From here, you

may opt to proceed with the wizard (select

Next

) or save this setting and exit the wizard (select

Done

). See also step 3 below.

PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.

1. Refer to the appropriate subsection below, depending on the

Pro:Centric server configuration, to complete the Media Type and

related (Data Channel or IP) fields.

RF Configuration

a) In the Media Type field, use the Left/Right arrow keys on the

Installer Remote to select

b) In the Data Channel field, either key in or use the Left/Right

arrow keys to select the RF channel number that will be used

by the Pro:Centric server as its data channel. The Data Channel

value can be set from 1 to 135.

IP Configuration

a) In the Media Type field, use the Left/Right arrow keys on the

Installer Remote to select

Note:

By default, the Pro:Centric wizard screen initially shows

RF configuration fields. When you select “IP” as the Media Type,

the Data Channel field is replaced with (IP) Address and Port

fields.

b) In the Address and Port fields, either key in or use the Left/

Right arrow keys to select the appropriate values for the

Pro:Centric server IP address and port number.
The IP address must match the IPv4 multicast address and

the port number must match the port number that is set in the

Pro:Centric server.

(Continued on next page)

Installer Menu Wizard

Set up the Pro:Centric feature of the TV

PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279

255

Media Type

Address

Port

Pro:Centric Mode

Done

Exit

Configuration Only

►

255

Installer Menu Wizard

Set up the Pro:Centric feature of the TV

Configuration Only

PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279

Auto Search

Media Type

Data Channel

Pro:Centric Mode

Done

Exit

Pro:Centric Configuration Screen with

RF Media Fields

Pro:Centric Configuration Screen with

IP Media Fields

Summary of Contents for 22LY560M





















































































Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands

LG 22LY560M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands