57
206-4261
IP Environment Setup
The IP Environment Menu enables you to set up the network features
of the TV. With the exception of Network Connection settings, the IP
Environment settings are editable (with the Installer Remote) only if
the TV is in Pass-through Mode and read-only when the TV is not in
Pass-through Mode. Also, if you intend to create a Master TV Setup
for cloning purposes (using a TLX file—see Master TV Setup
procedure on pages 31 to 35), all IP Environment settings, with the
exception of the Network Connection settings, may be cloned.
Accessing the IP Environment Menu
1. Use the Installer Remote to access the Installer Menu (see
“Accessing the Installer Menu” on page 21 for further information).
2. Navigate to Installer Menu item 119 DATA CHANNEL, and press
2
-
5
-
3
+
MENU
to launch the IP Environment Menu (see example
at right).
Use the Up/Down arrow keys on the Installer Remote to select the
desired menu option and then press
OK
. Refer to the following
sections for information on each of the IP Environment setup options.
When you have completed your IP Environment configuration
as required
, press
EXIT
or
on the Installer Remote to exit the IP
Environment Menu.
Configuring the Network Connection
This option enables you to set up the TV’s wired network connection.
1. With the IP Environment Menu on display, use the arrow
keys on the Installer Remote to select
Network Connection
.
Then, press
OK
.
The first of a series of Network Setting windows will be displayed
on the screen.
2. If not already done, connect the appropriate cable between the
TV and the network. Then, use the arrow keys on the Installer
Remote to select
Start Connection
and press
OK
.
3. By default, the TV is configured for DHCP. If configured, the
DHCP server will assign an IP address to the TV once the TV
successfully connects to the network, and a “Wired network is
connected” message will be displayed at the top of the next
Network Setting screen (see example at right).
• If no further network configuration is required, use the arrow
keys on the Installer Remote to select
Complete
and press
OK
to return to the IP Environment Menu.
• If a DHCP server is not configured and/or if you wish to set
static IP configuration data for the TV, continue with step 4.
4. Use the arrow keys on the Installer Remote to select
Set
Expert
from the Network Setting screen, and then press
OK
.
IP Environment
OK
Move
IP Environment
OK
Move
• Network Connection
• Network Status
• Pro:Centric
• MAC Address: CC:2D:8C:87:8B:70
(Continued on next page)
Wired network is connected.
Network Setting
Complete
Previous
i
Set Expert
For detailed settings, select [Set Expert].
Connect a LAN cable to the back of TV.
Setting your network will enable network-related features on the TV.
Network Setting
Start Connection
Next
Previous
Note:
When you enter the IP Environment
Menu, the Installer Menu is exited. If you are
also in the process of updating Installer Menu
items, you may wish to set all items as needed
before you access the IP Environment Menu.
Otherwise, you will need to reaccess the
Installer Menu to set additional items.
