LG 22LY560M Commercial Mode Setup Manual Download Page 12

Page: 12 / 84

206-4261

The Express Script Installer Menu Wizard guides you through the process of setting up the essential

items for most hospital TV viewing applications and also enables you to configure the Pro:Centric

settings on the TV. The wizard will appear on the screen each time the TV is turned ON, until

configuration is completed or the wizard is exited. Use the Installer Remote to make selections and

complete each wizard step.

Before You Begin

•

If you plan to create a customized Master TV Setup using the procedure described on pages

31 to 35 or use a TLX file for cloning or FTG Mode configuration purposes, be sure to exit the

Express Script in order to avoid setup conflicts that may cause the TV to malfunction. The

Express Script Installer Menu Wizard is intended for individual TV setup or TLL cloning only.

•

If it has been completed or exited and therefore does not display, the Express Script Installer

Menu Wizard can be reactivated; however, this requires that you perform an “IN-STOP” to

restore factory defaults on the TV(s). See Reference section, “Restoring Factory Defaults on

the TV(s),” for further information.

Caution: Do NOT unplug the TV power cord or remove the antenna cable or, if

applicable, the LAN cable during the configuration process, as doing so may

interrupt the current step and/or corrupt the configuration data.

Initiate Configuration or Exit the Express Script Installer Menu Wizard

Note: If you bypass the Express Script, pillow speaker functionality will not be

enabled unless you set Installer Menu item 027 HOSPITAL MODE appropriately. See

the “Installer Menu” section of this document for further information.

Select Express Script to continue

Installer Menu Wizard

Use the Express Script to set up the TV

Exit

PTC: V1.00.020 CPU: V03.11.00.01 ASIC: D279

Express Script

From the Express Script launch screen, you have the following options:

•

To proceed with the Express Script Installer Menu Wizard, use the Up/Down arrow keys on the

Installer Remote to select/highlight

Express Script

. Then, press

on the Installer Remote.

Note:

You can select the “Express Script” option if you want to configure Pro:Centric settings

on this TV, even if you do not intend to complete the TV configuration using the Express Script.

After you configure the Pro:Centric settings, you will have the option to exit the remainder of the

wizard, if desired.

•

To exit the wizard without completing any configuration, use the Up/Down arrow keys on the

Installer Remote to select/highlight

Exit

and press

. In the confirmation pop-up window,

select

, and then press

once more on the Installer Remote.

Express Script Installer Menu Wizard

Summary of Contents for 22LY560M





















































































Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands

LG 22LY560M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands