LG 22LY560M Commercial Mode Setup Manual Download Page 72

Page: 72 / 84

206-4261

Reference: 22/28LY560M Rear and Side Jack Panels

PILLOW SPEAKER

ANTENNA/

CABLE IN

RGB IN (PC)

SPEAKER OUT

LINE OUT

SERVICE ONLY

MPI

RESET

OPTICAL

AUDIO OUT

LAN

RESET UPDATE

UPDATE

Restricted to software updates.

RESET

Initiates a hardware reset and

turns the TV OFF.

MPI

When the TV is in Pass-through Mode,

the MPI function enables an external

MPI control device (i.e., VOD/PPV STB,

etc.) to control the TV.

AV IN/AUDIO IN (RGB DVI)

(3.5 mm jack) Connect video/audio output

from external device (use A/V adapter cable

provided with TV), or connect audio for RGB

or DVI device.

SPEAKER OUT / LINE OUT

(3.5 mm jack) Connect external audio (fixed speaker,

variable speaker, or fixed line level [amplifier])

equipment. See Reference section, “External Stereo

Speaker Setup,” for further information.

HDMI IN 1

Connection for HDMI output from

external device.

ANTENNA/CABLE IN

Connect to Antenna/

CATV.

SERVICE ONLY

Restricted to service updates.

OPTICAL AUDIO OUT

Use for amps and home theater systems.

Note: When the TV is OFF, this port is not

enabled.

USB IN

2 (MHL)

USB IN

2 (MHL)

AV IN/ AUDIO IN (RGB DVI)

Side Jack Panel

HDMI IN 2 (MHL)

Connection for HDMI output from

external device.

USB IN

Insert USB memory device for software

updates, cloning purposes, FTG Mode

configuration, picture/music entertainment,

etc., as applicable.

RGB IN (PC)

Connection for RGB output from PC.

PILLOW SPEAKER

Connect pillow speaker here.

LAN

Use for network connection

(i.e., for Pro:Centric data).

Summary of Contents for 22LY560M





















































































Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands

LG 22LY560M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands