36
206-4261
Channel Icons / Custom Text Labels (2-5-4 + MENU Mode)
Changing Channel Icons and/or Adding or Editing
Custom Text Labels in the Channel-Time Display
If there is no pre-assigned icon for a channel, you can add
a custom text label of up to seven (7) characters to help
identify the channel or network. Also, if desired, a custom
text label can be added to the Channel-Time display in
addition to a pre-assigned icon. You may also add text
labels for the Aux input sources to clearly identify the
devices that are connected to the Aux inputs.
Changing icons and/or adding or editing custom text labels
can only be done if there are channels that have been
transferred to the TV’s PTC either during the Express
Script/Custom Master TV Setup (see pages 12 to 17 or
pages 31 to 35, respectively) or by cloning (TLL file only).
Note:
A blank letter space is available between “Z” and “!”.
To perform channel editing/labeling:
1. Use the Installer Remote to access the TV Installer
Menu (see “Accessing the Installer Menu” on page 21
for further information).
2. Press
2-5-4
+
MENU
on the Installer Remote to access
the Channel Label Editing Menu.
3. Change channel icons and/or add or edit custom text
labels as described in the procedures below. (You can
do this more than once.)
4. To exit the menu when you are done, press
MENU
.
1 2 3 4 5 6 7
XYZ
XYZ
XYZ
NETWORK
(Icon)
(Custom Text Label)
Changing a Channel’s Icon on
the Master TV
1. Use Channel Up/Down to select
the desired channel.
2. Use the Left/Right arrow keys
to select the thin letter “
I
” on the
Channel-Time display.
3. Use the Up/Down arrow keys to
select the icon with which you want
to identify the channel. (If you know
the icon number, enter the number,
and press
OK
.)
4. Proceed to add/edit custom text
labels, or go to the next channel.
Adding/Editing Channel Labels
on the Master TV
1. Use Channel Up/Down to select
the desired channel.
2. Press the Left or Right arrow
repeatedly until the numbers 1 to 7
appear on the display. The number
shows the position of the character
that can be changed. Number 1 is
the first character, number 2 the
second character, etc.
3. Use the Up/Down arrow keys to
select the desired character.
4. Proceed to the next number posi-
tion, or go to the next channel.
Adding/Editing Source Labels
on the Master TV
1. Press
CH. BANK
to select the
desired Aux input source: AV1,
RGB, HDMI1, or HDMI2.
2. Press the Left or Right arrow
repeatedly until the numbers 0 to 9
appear on the display. The number
shows the position of the character
that can be changed.
3. Use the Up/Down arrow keys to
select the desired character.
4. Press
CH. BANK
for the next Aux
input, or use Channel Up/Down to
return to channels.
•
Channel Up/Down
: Tunes to the next channel in scan.
•
Left/Right Arrows
: Select the item to change. If “I” is
shown, the icon can be changed. If a number is shown, it
indicates the position of the character that can be changed.
•
Up/Down Arrows
: Select the icon or the character to be
displayed. Tip: Arrows can be held down for fast scrolling.
•
0 – 9
: Use to enter the index number of the icon, if
known.
•
OK
: Changes the icon after the icon number has been
entered.
•
CH. BANK
: Use to select Aux inputs.
•
MENU
: Exits the editing process.
Installer Remote Control Key Functions for Master TV Channel Label Editing Menu
