LG 22LY560M Commercial Mode Setup Manual Download Page 62

Page: 62 / 84

206-4261

Reference: Downloading a Splash Screen using a USB Memory Device

This section describes how to download a splash screen image using the TV

Manager / USB Download Menu “Logo Image Download” option, though you

may also use the Ez Download utility to download the splash image, if desired.

See “Ez Download Utility” on pages 18 to 20 for further information.

Splash Screen Image File Guidelines

•

The splash screen image must be a baseline (not progressive) JPEG.

•

The image should be no larger than 1 MB.

•

The maximum resolution allowed for a 22/28/32LY560M splash screen image

is 1360 x 768 pixels (HD)

•

The maximum resolution allowed for a 42LY560M splash screen image is

1920 x 1080 pixels (FHD).

•

Avoid using special characters, such as ?, -, etc., in the splash screen image

file name.

Before You Begin

•

The splash screen image file must be stored in a folder named “LG_DTV” in

the root directory of the USB memory device.

•

Ensure the USB device has been formatted with FAT format.

Download the Splash Screen Image

1. Turn ON the TV, and then insert the USB memory device into the TV’s USB

port.

2. Press

MENU

on the Installer Remote to display the TV setup menus (TV is in

Pass-through Mode) or the Function Menu (TV is not in Pass-through Mode).

3. Use the arrow navigation keys to select/highlight either the

Option

icon from the TV setup menus or the

Lock

menu icon from the Function

Menu. Then, press the number “

” key a total of seven times to display the

TV Manager /USB Download Menu.

4. With the TV Manager / USB Download Menu on display, use the Up/Down

arrow keys to select

Logo Image Download

, and then press

5. In the Logo Image Download window, use the Up/Down arrow keys to select

the image file to download, and then press

The TV will show download completion progress in a new window. Do NOT

remove the USB device until the image download is complete. When the image

download is complete, the TV will briefly display a “Updating complete” window

and then reset itself with an automatic restart. Upon the restart, you should see

the new splash screen.

TV Manager

USB

Ez Download

Logo Image Download

Upgrade TV Software
Upgrade PTC Software
Teach To TV (TLX)
Teach To TV (TLL)

Logo Image Download

Splash-Image-1920x1080-ProCentricJPEG

Summary of Contents for 22LY560M





















































































Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands

LG 22LY560M, Commercial Mode Setup Manual

Search results

Summary of Contents for 22LY560M

Reviews:

Related manuals for 22LY560M

Brands by name

Popular brands