31
206-4261
Custom Master TV Setup
Notes:
• Some menu options vary between analog and digital channels and Aux inputs.
• The end user only has access to features that are available on the pillow speaker or the
user remote control if provided by the institution.
This section describes how to create a customized Master TV Setup for cloning purposes when the TV is
in Pass-through Mode.
Note:
Cloning requirements and procedures are described in detail on pages 41 to 45. Refer to FTG
Mode information on pages 46 to 52 for details on entering FTG Mode and configuring/editing the FTG
Channel Map and FTG Installer Menu settings.
Before You Begin
•
It is recommended that you disconnect all Aux inputs if you intend to run Auto Tuning (Channel Search).
Under certain conditions, Auto Tuning is disabled if there is an Aux input active.
•
If not disabled in the Installer Menu, Aux inputs will appear in the channel lineup between analog and
digital channels after the TV setup is transferred to the commercial controller (PTC).
•
All Learning and Teaching processes on these TV models are performed via USB memory device. See
“Cloning Methods” below to determine the type of file—either the TLX file format or the legacy TLL file
format—to use for cloning purposes. Several of the Master TV Setup procedure steps are dependent on
the desired file type.
Cloning Methods
See also “Clonable TV Setup Menu Features” list below.
Using a USB Memory Device / TLX File
•
The TLX file format clones Installer Menu settings, IP Environment Menu settings (with the exception of
network settings), and all TV sources’ (analog, digital, AV1, HDMI, etc.) clonable setup menu settings.
•
Not intended for cloning an auto-tuned/edited channel lineup, as the channel lineup is converted to an
FTG Channel Map when saved (Learned) from a TV to a TLX file. If the TLX file with the FTG Channel
Map is then used for Teaching purposes, the Target TV(s) will be configured for FTG Mode.
Using a USB Memory Device / TLL File
The TLL file format only clones the contents of the commercial controller (PTC) memory, which is limited
to an auto-tuned/edited channel lineup, Installer Menu settings, and one TV source’s (analog, digital, or
Aux) clonable setup menu settings.
Clonable TV Setup Menu Features
Channel
Auto Tuning (Channel Lineup)
Manual Tuning
Channel Edit
Channel Label
Picture
Picture Mode
*
Audio
Auto Volume
Clear Voice
Balance
Sound Mode
AV Sync. Adjust
*
Time
Clock Mode (Auto/Manual)
*
Time Zone
Auto Off
Option
Language
Caption
Standby Light
*
Advanced Control (Picture Mode), AV Sync. Adjust, and DST (Clock Mode) settings are cloned via TLX file only.
